Zortrax M200

 

Important Practices & Procedures:

  • Software: Z-Suite
    • The serial number is provided in the "Software" page on our website.
  • Use the toolbar on the side to place your part or choose "Auto Placement".
  • In Z-Suite you can scale, rotate, split, duplicate, and move your part.
  • Select "Print" to configure print settings (fill, quality, support material, etc.).
  • Press "Prepare to Print" to save your model as a z-code file, then upload it to the SD card.
    • Insert the SD card and make sure it clicks into place.

Back to 3D Printers